Net firewall Natting for 2 network cards

Home › Forums › Discussions › Support › Net firewall Natting for 2 network cards

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 27, 2006 at 5:24 pm #5034
    Santron99
    Participant

      I like the GUI’s ease of navigation but I can’t seem to get the nat correct. I am on my second day of trying out the firewall to see if I can use it. I have 2 network cards. My private network is on 10.134.1.254. My public network is on 172.25.1.2. The security is set to low on both. How do I set up rules to nat all my 10.134.1.0 to 172.25.1.2 and pass it out the 172.25.1.2 network card. Then pass the response back to the appropriate 10.134.1.0 client.

      Thanks,
      Santron

      June 28, 2006 at 11:17 am #6074
      Kon
      Participant

        Thank you for choosing NeT Firewall.

        In current version of NeT Firewall, NAT is not implemented, and you can use Routing and Remote Access, ICS included in your operation system.

        Andrew

        June 28, 2006 at 5:09 pm #6075
        Santron99
        Participant

          Thank you for your answer. After I posted that was exactly what I did and now its up and running. Do you think nat will be implemented within the next 6 months or maybee even longer range?

          June 29, 2006 at 7:38 am #6076
          Kon
          Participant

            We are going to include NAT and traffic shaper in the end July.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.