VirtNet does not install on Windows 10 version 1809 x64

This topic has 34 replies, 9 voices, and was last updated 1 year, 2 months ago by isabella_tai.

Viewing 15 posts - 1 through 15 (of 35 total)

1 2 3 →

Author

Posts
January 18, 2019 at 10:48 am #10615
rofl
Participant
The following messages are displayed:

The following hardware was not installed: Unknown
An error occured during the installation of the device
There is no driver selected for the device information set or element
January 20, 2019 at 9:12 am #10617
Vadim Smirnov
Keymaster
Thank you for the information. I suspect this is related to the driver signing policy in 1809 update. I will check, probably needed to sign the driver with EV certificate.
January 27, 2019 at 7:40 pm #10618
rhodgerss
Participant
I’m having this problem too. I need the Virtnet but can’t install this device. Is there any timeframe for this problem be solved?
January 27, 2019 at 10:10 pm #10619
Vadim Smirnov
Keymaster
I’ve installed and tested 1809 during the weekend and I confirm that the problem exists. Probably it is related to driver signing policy changes or another possibility is legacy NDIS versions support (for compatibility across all Windows versions VirtNet followed NDIS 3.0 specification). But no worries, I’ll prepare the new build when have some spare time over the next week.
January 31, 2019 at 12:42 pm #10621
stefat
Participant
Hey Guys!
The same issue happend with me.

I’m looking forward for the new build.
Thanks in advance!
January 31, 2019 at 1:34 pm #10622
Vadim Smirnov
Keymaster
Small update:

Signing VirtNet driver with EV certificate did not help, installation fails with the same error. So it looks that the problem is not related to driver signing and there is another reason for this. Right now it is difficult to say what has changed in 1809, may be Microsoft by chance or by purpose has dropped the support of the legacy versions of NDIS. I hope NDIS 6.0 version of VirtNet may help here…
January 31, 2019 at 2:30 pm #10623
rofl
Participant
note: If VirtNet was installed prior to upgrading to 1809, then the driver keeps working after the upgrade.
January 31, 2019 at 2:46 pm #10624
Beltran
Participant
Please I need support. I have the latest update win10, I can not install virtnet. SOS. Appreciate your support since I can not downgrade mh win10.
January 31, 2019 at 3:29 pm #10625
stefat
Participant
Yes, there is a new NDIS version in this Win10 build:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-ndis-versions

NDIS 6.81: Windows 10, version 1803
NDIS 6.82: Windows 10, version 1809

Following their links i’ve found this:
https://docs.microsoft.com/en-us/windows-hardware/drivers/develop/building-a-driver

Is it possible to convert the Virtnet driver to a Win10 compatible driver with those fancy Visual Studio debugging commands?

Sorry for the (probably) stupid question.
January 31, 2019 at 7:01 pm #10626
Beltran
Participant
Can someone else build the driver and let me know?
I really appreciate.
Regards,
B
February 3, 2019 at 4:48 pm #10627
Beltran
Participant
still awaiting???
February 4, 2019 at 12:01 pm #10628
stefat
Participant
Hey guys again!

https://www.howtogeek.com/235474/how-to-roll-back-builds-and-uninstall-updates-on-windows-10/

Here is a good topic to downgrade your Win10 to and earlier build.

I dont rly know exactly which update you have to remove to make Virtnet adapter installable again, but it defeneatly worth a try.
If you find out pls share it with us.
Thanks in advance! 🙂

Still looking forward for the update in the driver.

Vadim Smirnov! All our hope is in you! 🙂
February 4, 2019 at 9:15 pm #10629
Vadim Smirnov
Keymaster
I have devoted some time over the weekend to this issue, but I still don’t have a good idea what was changed by an update and how to fix this. It is definitely not about driver signing because that phase is passed fine. And setupapi.dev.log does not contain any helpful information:
```
>>>  [Device Install (DiInstallDevice) - ROOT\NET\0000]
>>>  Section start 2019/02/04 11:53:39.838
      cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
     ndv: Flags: 0x00000004
     dvi: {Plug and Play Service: Device Install for ROOT\NET\0000}
!    dvi:      Installing NULL driver!
     dvi:      {DIF_ALLOW_INSTALL} 11:53:39.858
     dvi:           Default installer: Enter 11:53:39.858
     dvi:           Default installer: Exit
     dvi:      {DIF_ALLOW_INSTALL - exit(0xe000020e)} 11:53:39.862
     dvi:      {DIF_REGISTER_COINSTALLERS} 11:53:39.862
     dvi:           Default installer: Enter 11:53:39.862
     dvi:           Default installer: Exit
     dvi:      {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 11:53:39.866
     dvi:      {DIF_INSTALLDEVICE} 11:53:39.866
     dvi:           Default installer: Enter 11:53:39.866
!    dvi:                Installing NULL driver!
     dvi:                Install Null Driver: Removing device sub-tree. 11:53:39.870
     dvi:                Install Null Driver: Removing device sub-tree completed. 11:53:39.874
     dvi:                Install Null Driver: Restarting device. 11:53:39.878
     dvi:                Install Null Driver: Restarting device completed. 11:53:39.882
     dvi:                Install Device: Configuring device class. 11:53:39.882
     dvi:                Install Device: Configuring device class completed. 11:53:39.882
     dvi:                Device Status: 0x01802401, Problem: 0x1c (0x00000000)
     dvi:                Install Device: Starting device 'ROOT\NET\0000'. 11:53:39.886
     dvi:                Install Device: Starting device completed. 11:53:39.894
     dvi:           Default installer: Exit
     dvi:      {DIF_INSTALLDEVICE - exit(0x00000000)} 11:53:39.898
     ump: {Plug and Play Service: Device Install exit(00000000)}
<<<  Section end 2019/02/04 11:53:39.910
<<<  [Exit status: SUCCESS]

>>>  [Delete Device - ROOT\NET\0000]
>>>  Section start 2019/02/04 11:59:51.125
      cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
     dvi: Query-and-Remove succeeded
<<<  Section end 2019/02/04 11:59:51.133
<<<  [Exit status: SUCCESS]
```
Mentioned Problem: 0x1c is CM_PROB_FAILED_INSTALL for which I could find anything helpful besides https://docs.microsoft.com/en-us/windows-hardware/drivers/install/cm-prob-failed-install

The only solution I can see so far would be creating a new NDIS 6 virtual network adapter driver…
February 4, 2019 at 10:23 pm #10630
Vadim Smirnov
Keymaster
I’ve created a quick NDIS 6.0 replacement for the original VirtNet driver. You can download it from here. Let me know how it worked for you…
February 5, 2019 at 1:32 am #10631
rhodgerss
Participant
This version install ok, but don’t have the function network address.
Author

Posts